Custom Metal Logo Plates
Metal logo plates for equipment, appliances and product housings, made to your artwork or existing sample. The plate shape, finish and mounting are agreed before production.

Choose the Plate Construction
Choose the visible background, lettering and relationship to the housing. These features can be combined on one plate.

Flat Logo Plates
A logo on a defined metal backing, with the outline and corners sized for the product.

Recessed Lettering
Text or graphics below the face, with color fill where specified.

Raised Lettering
Lettering above the surrounding surface; height, edges and clearances are checked for the construction.

Recessed-Housing Plates
A plate fitted into a product pocket, with its overall thickness and edge clearance reviewed against the recess.
Need a sculpted profile? See Metal Emblems & Badges. Need thin separate lettering? See Metal Stickers & Transfer Parts.
Materials, Finish & Product Fit
| Aluminum 5052 / 6061 | 0.3–3 mm reference; a lighter plate, with an anodized finish where specified. |
| Stainless Steel 304 / 316 | 0.3–3 mm reference; brushed or polished appearance, with grade selected for use conditions. |
| Brass | 0.5–3 mm reference; natural yellow-metal appearance with delivery finish and protection defined. |
| Chemical Etching | Recessed graphics; depth reference 0.02–0.15 mm, with color fill where specified. |
| Mounting | Adhesive backing or fixing holes, confirmed against the actual housing and drawing. |
Final material, thickness and process settings are agreed for the part. Identify the actual coating or texture that the adhesive contacts; a substrate name alone does not establish suitability.
Finish: Approve color, gloss, grain direction and visible edges against a physical reference where needed. A color code or roughness value alone does not fully define a reflective finish.
Recess: Show pocket dimensions, corner shape and available depth. Check plate and adhesive thickness together, including the desired projection above the housing.
Explore Finishes & Surface Treatments · Review Copper & Brass · Review Manufacturing Capabilities
Sample Approval & Production Reference
Approve the part appearance and installed fit as separate checks.
- Appearance: Logo proportions, lettering, color, gloss, grain direction and agreed visible-face criteria.
- Fit: Outline, holes, recess clearance, adhesive contact and nearby product features on the actual housing or an agreed representative surface.
- Packing: Define surfaces needing separation or protection during assembly and transport.
The approved drawing revision and sample, where required, guide production checks. Review changes to the housing coating, artwork, material, finish or mounting before repeat orders.

Start With Your Artwork or Existing Plate
Send the available reference; unresolved details can be identified during review.
New Artwork or Drawing
Send vector artwork or a drawing with the finished size, outline and lettering. Include the mounting-area reference where available.
Existing Plate or Photos
Alternatively, send clear front-and-back sample photos with known dimensions. Include a physical finish reference or information about nearby parts the plate should coordinate with.
Also tell us:
- Required quantity.
- A photo or drawing of the mounting area.
- Physical finish reference or nearby hardware to coordinate with.
- Known material, finish and fixing requirements.
Production orders normally start at 300 pieces.
Typical samples: about 7 days.
Typical bulk production: about 12–20 days after sample approval.
Sample charges and schedule are confirmed in the quotation.
Frequently Asked Questions
Can you reproduce small lettering and fine lines?
We check the complete artwork at the finished size, including stroke widths, gaps and isolated details. Any adjustment needed for manufacture is confirmed before production.
Can I approve the finish from photos?
Photos help review layout and general appearance. A physical sample is more useful for reflective color, gloss, texture and fit; agree which checks the project needs.
Can the plate match existing hardware?
Send a physical reference where possible. Different substrates and finishes may reflect light differently, so approve the proposed result rather than relying only on the same color name.
Is new tooling required?
We check the outline, lettering, holes and process route against existing tooling. Any dedicated tooling or setup charges are stated in the quotation.
Request a Quote or Sample
Send your artwork or sample photos, plate size and quantity. Request a sample to check the finish and fit on your product.
Prefer email? Contact sales@haimingou.com.
