3D Metal Logos
Showing all 6 results
3D metal logos are raised badges made to apply onto finished products, not stand alone. Himgo die casts or electroforms a logo in relief, then plates it. Adhesive backing lets appliance and electronics brands fix the logo straight onto a housing during assembly.
- Die casting or electroforming for raised relief
- Chrome, black, or plated finish
- Adhesive backing for assembly-line fitting
- Sizes 30–120mm
- Samples in 5–7 days
Materials & finishes
| Option | Choices |
|---|---|
| Material | Zinc alloy (die cast), nickel (electroformed), aluminum, stainless, brass |
| Thickness | 0.05–3mm relief depth |
| Size | 30mm, 50mm, 80mm, 120mm, custom to your drawing |
| Finish | Chrome, black, brushed, plated, painted |
| Marking/Process | Die casting or electroforming for the 3D logo shape, then plating |
| Mounting | 3M adhesive for assembly-line fitting, studs, holes |
Die casting suits deeper relief and higher volumes. Electroforming holds finer detail for smaller logos on compact devices.
Typical buyers & uses
- Appliance brand — adding a die cast logo badge to the face of a finished unit.
- Electronics OEM — applying a chrome-plated emblem to a device housing on the line.
- Automotive accessory maker — mounting a raised badge onto trim pieces.
- Assembly-line operator — fitting adhesive-backed logos at speed during final assembly.
Size & price reference
| Example spec | Ref US$/pc |
|---|---|
| Electroformed nickel logo, 30mm, adhesive back | $0.25 |
| Die cast zinc alloy logo, 50mm, chrome plated | $0.95 |
| Die cast logo, 80mm, black and chrome two-tone | $1.68 |
Indicative only. Final price depends on process, plating steps, and quantity.
Ordering
- MOQ 100–500 pieces, by complexity.
- Sample lead time 5–7 days; bulk 12–30 days, by quantity.
- Send logo artwork, the surface it mounts to, and adhesive or stud choice.
- Samples are approved before the production run — see how we work.
FAQ
How much relief height can a 3D logo have?
Die casting typically gives 1–3mm relief. Electroforming holds finer detail at lower relief for small logos.
Will chrome plating hold up on outdoor appliances?
Chrome plating resists most weather exposure. Salt-spray tested plating is available on request for coastal installs.
Can the adhesive back survive assembly-line heat?
Yes, standard 3M adhesive tolerates typical assembly-line handling. Tell us your process temperature so we match the adhesive.
What’s the difference between electroforming and die casting for logos?
Electroforming builds up fine metal layers for detail. Die casting molds the shape in one step for volume runs.
Can you match an existing Pantone color in the plating?
Yes. Send the Pantone reference and we match the color as closely as the process allows.
