Adhesive 3D Metal Logos
No-hole 3D logos held by adhesive or transfer film, fit to curved or painted product surfaces. Sized and shaped from your artwork.
Description
A raised logo still needs to go on without drilling in most retrofit projects. Adhesive backing handles that. It holds a dimensional metal logo to a curved or painted surface. No screws or pins are needed, and the original surface stays undamaged.
Where it fits
- Curved product housings where screws or pins aren’t practical
- Retrofit branding on existing appliances or equipment
- Painted or coated surfaces that shouldn’t be pierced
- Lightweight electroformed or thin die-cast logos
- Products where a clean, fastener-free face matters
- Housings where a hole would break a seal or weaken the wall
Common sizes
30mm, 50mm, 80mm, and 120mm are the usual range. Send a drawing for other outlines or sizes.
Materials & finishes
Zinc alloy, nickel, or aluminum builds all take a transfer-film or 3M adhesive backing. Chrome-like, painted, or brushed finishes all work with tape mounting. Himgo matches the film to the curve of your surface.
Typical applications
| Industry / setting | How this product is used |
|---|---|
| Laptop lid manufacturing | Adhesive-backed 3D logo applied to the lid cover, giving a raised-metal brand mark without drilling into a sealed shell. |
| Tablet and e-reader case assembly | Adhesive 3D logo mounted on the back panel of a case or sleeve during final assembly. |
| Portable speaker manufacturing | Adhesive 3D logo applied to the front frame of a speaker, sitting flush against a curved housing. |
| Retail point-of-sale display production | Adhesive 3D logo mounted on a counter display or shelf header, giving a dimensional brand mark without visible fasteners. |
| Promotional merchandise production | Adhesive 3D logo applied to a desk plaque or branded giveaway item, stuck on with no drilling required. |
Specifications
| Material | aluminum or stainless (other grades on request) |
| Thickness | 0.3-3 mm |
| Size | 30mm, 50mm, 80mm, 120mm (custom to your drawing) |
| Marking | chemical etching, electroforming, zinc die casting, engraving, plating |
| Surface finish | brushed, anodized, plated, matte, painted |
| Mounting | 3M adhesive, mounting holes, studs |
| Tolerance | +/-0.05-0.10 mm |
| MOQ | 100-500 pcs (by complexity) |
| Lead time | sample 5-7 days; bulk 12-30 days (by quantity) |
| Tooling | US$150-2,000 one-time (by complexity) |
Size & price reference
| Example spec | Ref US$/pc |
|---|---|
| aluminum or stainless, 50 mm, 1.0 mm, simple finish | US$0.30-0.61 |
| aluminum or stainless, medium size, standard finish | US$0.57-0.93 |
| aluminum or stainless, large or specialty finish | US$0.84-1.38 |
Indicative only. Final price depends on surface finish, mounting method, marking complexity, and order quantity. Send your drawing for a factory-direct quote.
Getting a quote
Send your logo file, the mounting surface material, and its curvature if any. Himgo checks adhesive fit before confirming the quote.
