Equipment ID Metal Plates
ID plates fastened by rivets, screws, or adhesive, sized to hold serial and model data on equipment housings.
Description
How should an ID plate attach to housing that flexes, vibrates, or gets washed down regularly? The mounting method matters as much as the material. Rivets and screws hold firm on vibrating equipment; adhesive backing suits smooth, low-vibration surfaces. Himgo picks the fastening route from your drawing and the equipment’s duty cycle. The plate is then engraved with serial and model fields.
Applications
- Serial-tagged plates for asset and warranty tracking
- Model-data plates riveted to housings and frames
- Adhesive-mounted plates on smooth equipment covers
- Multi-hole plates for bolted access panels
Material and finish choices
Aluminum or stainless steel, plated or painted where a coating is called for. Hole spacing holds to +/-0.10mm so bolt patterns line up across a batch.
Standard size guide
100x60mm and 120x80mm are common; larger equipment often takes 200x100mm. Thickness runs 0.3-3mm depending on the fastening method.
Typical applications
| Industry / setting | How this product is used |
|---|---|
| Rental equipment fleets | Pop-riveted to forklifts and excavators carrying a serial number cross-referenced against fleet records |
| Municipal utility vehicle depots | Bolted to the truck chassis carrying a fleet number used for dispatch and maintenance logs |
| Laboratory instrument manufacturers | Screwed to the analyzer housing listing model and serial number for service call lookups |
| Agricultural equipment manufacturers | Pop-riveted to tractor and implement frames used for parts ordering by serial number |
Specifications
| Material | 304 stainless (other grades on request) |
| Thickness | 0.3-3 mm |
| Size | 80x40mm, 100x60mm, 120x80mm, 150x100mm (custom to your drawing) |
| Marking | chemical etching |
| Surface finish | anodized (5-25 micron; hard 25-70 micron), brushed (Ra 0.4-1.2 micron), matte, mirror, plated, painted |
| Mounting | 3M/VHB adhesive (0.5-1.1mm), mounting holes, rivets, screws |
| Tolerance | +/-0.05-0.10 mm |
| MOQ | 100-500 pcs (by complexity) |
| Lead time | sample 5-7 days; bulk 12-30 days (by quantity) |
Size & price reference
| Example spec | Ref US$/pc |
|---|---|
| 304 stainless, 25 x 28 mm, 0.2 mm, simple finish | US$0.24-0.32 |
| 304 stainless, medium size, standard finish | US$0.31-0.41 |
| 304 stainless, large or specialty finish | US$0.38-0.55 |
Indicative only. Final price depends on surface finish, mounting method, marking complexity, and order quantity. Send your drawing for a factory-direct quote.
Send for quote
Send the drawing with hole positions or the adhesive-mount area marked, plus the model and serial format. Send artwork or a sample for review.
