Aluminum Metal Logo Plates
Aluminum logo plates, anodized for color and cut to size from your artwork. Light enough for electronics and appliance housings, with adhesive or hole mounting.
Description
A logo on an appliance panel needs to stay light without looking thin. Aluminum plates give brands that option. They hold fine detail at a fraction of steel’s weight. Himgo etches, engraves, or prints the mark, then anodizes the surface for color and scratch resistance. The result stays flat and adds little bulk to the housing.
Metals & surface options
5052 and 6061 aluminum are the usual choices, run 0.5-3mm thick. Anodizing adds 5-25 microns of color. A harder 25-70 micron layer suits logos on high-touch surfaces. Brushed or matte textures give a more neutral look when color isn’t needed.
Typical projects
- Logo plates fixed to appliance housings and electronics enclosures
- Brand marks on control panels and equipment covers
- Lightweight signage for cabinets, kiosks, and display units
- Color-matched plates for consumer product branding
- ID plates on carts, racks, and portable equipment
Sizes we run
Common formats run 30mm, 50mm, 80mm, and 120mm across. Send your drawing for any size outside that range.
Typical applications
| Industry / setting | How this product is used |
|---|---|
| Consumer electronics housings | Thin aluminum plate (0.3-0.8mm) with etched or printed logo, adhesive-mounted to a router, power bank, or set-top box casing without adding noticeable weight. |
| Outdoor power equipment | Anodized aluminum plate riveted to a generator or pressure washer housing, holding color and legibility through UV exposure and rinse-downs. |
| Small kitchen appliance manufacturing | Brushed aluminum plate fixed with a peel-and-stick adhesive pad to a stand mixer or coffee maker base, matching the appliance’s metal trim. |
| Luggage and travel gear | Lightweight aluminum plate riveted to a hard-shell case or backpack frame, keeping added weight under a few grams per unit. |
| LED lighting fixture assembly | Aluminum plate fixed near the switch or driver housing on a desk lamp or fixture base, printed with the model or brand mark. |
Specifications
| Material | aluminum (other grades on request) |
| Thickness | 0.3-3 mm |
| Size | 30mm, 50mm, 80mm, 120mm (custom to your drawing) |
| Marking | chemical etching, electroforming, zinc die casting, engraving, plating |
| Surface finish | brushed, anodized, plated, matte, painted |
| Mounting | 3M adhesive, mounting holes, studs |
| Tolerance | +/-0.05-0.10 mm |
| MOQ | 100-500 pcs (by complexity) |
| Lead time | sample 5-7 days; bulk 12-30 days (by quantity) |
| Tooling | US$150-2,000 one-time (by complexity) |
Size & price reference
| Example spec | Ref US$/pc |
|---|---|
| aluminum, 50 mm, 1.0 mm, simple finish | US$0.21-0.43 |
| aluminum, medium size, standard finish | US$0.40-0.65 |
| aluminum, large or specialty finish | US$0.59-0.97 |
Indicative only. Final price depends on surface finish, mounting method, marking complexity, and order quantity. Send your drawing for a factory-direct quote.
What to send
Send your logo artwork, target size, and mounting preference. Himgo quotes from the drawing and confirms finish before sampling.
