Brushed Metal Logo Plates
Brushed-finish logo plates in aluminum or stainless, made to resist fingerprints and handling marks. Cut and marked to your drawing.
Description
A shiny logo plate shows every fingerprint and scratch within a week. Brushing the surface first solves that. It leaves a directional grain that hides handling marks. The surface still catches light instead of going flat and dull.
Sizes & thickness
Plates run 0.5-3mm thick, in 30mm, 50mm, 80mm, or 120mm formats. Send a drawing for a different footprint or thickness.
Metals and finishes
Aluminum or stainless steel both take a brushed texture well, at roughly Ra 0.4-1.2 micron. Himgo can leave the brush natural. A matte clear coat is optional, and aluminum can be anodized afterward for a tinted brushed look.
Where buyers use it
- Logo plates on appliance fronts and control panels
- Brand marks on tool housings and equipment covers
- Fixtures that get handled often by staff or the public
- Any surface where a mirror finish would show too much wear
- Retail counters and fixtures needing a low-glare look
Typical applications
| Industry / setting | How this product is used |
|---|---|
| Upscale furniture and cabinetry | Brushed metal plate inset flush into a cabinet door or drawer front, aligned with the piece’s directional-grain hardware. |
| Home audio speaker cabinets | Brushed plate fixed to the front baffle of a speaker enclosure next to the tweeter grille, matching a brushed-aluminum trim ring. |
| Kitchen appliance fascia | Brushed plate applied to a range or refrigerator door panel, blending into brushed stainless trim on the same unit. |
| Elevator cab interiors | Brushed plate mounted above the control panel inside an elevator cab, matching brushed stainless wall cladding. |
| Wine and spirits display cabinetry | Brushed plate fixed to the door of a retail display case or humidor, giving a directional sheen under cabinet lighting. |
Specifications
| Material | aluminum or stainless (other grades on request) |
| Thickness | 0.3-3 mm |
| Size | 30mm, 50mm, 80mm, 120mm (custom to your drawing) |
| Marking | chemical etching, electroforming, zinc die casting, engraving, plating |
| Surface finish | brushed, anodized, plated, matte, painted |
| Mounting | 3M adhesive, mounting holes, studs |
| Tolerance | +/-0.05-0.10 mm |
| MOQ | 100-500 pcs (by complexity) |
| Lead time | sample 5-7 days; bulk 12-30 days (by quantity) |
| Tooling | US$150-2,000 one-time (by complexity) |
Size & price reference
| Example spec | Ref US$/pc |
|---|---|
| aluminum or stainless, 50 mm, 1.0 mm, simple finish | US$0.30-0.61 |
| aluminum or stainless, medium size, standard finish | US$0.57-0.93 |
| aluminum or stainless, large or specialty finish | US$0.84-1.38 |
Indicative only. Final price depends on surface finish, mounting method, marking complexity, and order quantity. Send your drawing for a factory-direct quote.
Start a quote
Send your artwork, preferred metal, and size. Himgo confirms the brush direction and finish before running a sample.
