Thin Raised Metal Stickers
Low-profile raised logo stickers built near the thin end of the sticker range for tight mounting clearances. Same adhesive-film install as standard transfer stickers.
Description
Some mounting spots leave almost no clearance for a raised logo. A thinner electroformed shape, closer to 0.1mm than 0.3mm, keeps the raised effect. It stays low enough to clear a tight housing gap. Himgo runs this at the thin end of the sticker range. It finishes with the same adhesive transfer film used across the line.
Where it fits
- Recessed logo pockets where a standard raised sticker would sit too proud.
- Slim consumer electronics where every added millimeter matters.
- Appliance control panels with limited clearance around the badge area.
- Retrofits onto existing flat decals that need a subtle lift, not a bold one.
Common sizes
Small formats suit this thickness well: 20x8mm, 30x10mm, and 25mm round are common. Larger marks are possible but the low-profile effect is most visible at small scale.
Materials & finishes
Nickel is the standard electroforming base at this thickness, holding detail near 0.05mm. Chrome, brushed, black, and gold-tone finishes apply the same as thicker versions of the sticker.
Typical applications
| Industry / setting | How this product is used |
|---|---|
| Curved electronics housings | The thin raised profile follows the curve of earbud cases and wireless speaker shells without lifting at the edges. |
| Slim appliance control panels | Applied to thin control overlays on microwaves and range hoods where a thicker emblem would interfere with button clearance. |
| Tight-clearance automotive trim | Used on steering wheel center caps and interior trim strips where mounting depth is limited. |
| Blister and shrink-wrap packaging | Low profile keeps the logo from adding bulk under shrink-wrap or blister card packaging. |
Specifications
| Material | electroformed nickel (other grades on request) |
| Thickness | 0.1-0.3 mm |
| Size | 20x8mm, 30x10mm, 50x15mm, 25mm round (custom to your drawing) |
| Marking | electroforming |
| Surface finish | chrome, brushed, black, gold-tone, plated |
| Mounting | adhesive transfer film (3M/VHB backing) |
| Tolerance | +/-0.05-0.10 mm |
| MOQ | 100-500 pcs (by complexity) |
| Lead time | sample 5-7 days; bulk 12-30 days (by quantity) |
Size & price reference
| Example spec | Ref US$/pc |
|---|---|
| electroformed nickel, 30 x 10 mm, 0.2 mm, simple finish | US$0.12-0.22 |
| electroformed nickel, medium size, standard finish | US$0.20-0.32 |
| electroformed nickel, large or specialty finish | US$0.29-0.46 |
Indicative only. Final price depends on surface finish, mounting method, marking complexity, and order quantity. Send your drawing for a factory-direct quote.
Getting a quote
Send your drawing for a factory-direct quote, noting the clearance available at the mounting point.
