Aluminum Engraved Nameplates
Aluminum nameplates, anodized then laser-engraved, built for equipment where plate weight and finish color both matter.
Description
Weight matters on portable equipment and enclosure lids where every gram adds up. Aluminum 5052 or 6061 engraves cleanly and weighs a fraction of steel at the same size. Himgo anodizes the surface first in most cases, then engraves through the oxide layer so the mark shows as a contrasting line.
Metals & surface options
Anodized aluminum (5-25 micron, or hard anodize up to 70 micron for higher wear areas) is the standard base for this product. Brushed (Ra 0.4-1.2 micron) and matte finishes are also available where anodizing isn’t needed. Thickness runs 0.3-3mm depending on plate size.
Typical projects
- Portable or handheld equipment where plate weight matters
- Enclosure lids and covers needing a light, engraved ID plate
- Consumer-facing equipment where anodized color adds brand contrast
- Indoor machinery not exposed to heavy corrosion risk
Sizes we run
Common sizes include 80x40mm, 100x60mm, and 120x80mm, though larger plates up to 200x100mm are routine. Any size cuts to your drawing at a tolerance near +/-0.10mm.
Typical applications
| Industry / setting | How this product is used |
|---|---|
| Aerospace ground support equipment | Engraved aluminum tags on cargo dollies and maintenance stands keep added weight to a minimum for equipment that gets moved constantly. |
| Electrical switchgear and control panels | Engraved aluminum plates mounted inside panel doors sit near live components without adding a conductive contact point. |
| Portable generators and pressure washers | Engraved aluminum data plates riveted to lightweight frames hold up on equipment that’s moved and stored frequently. |
| Trade show and exhibition displays | Engraved aluminum tags on portable display frames keep the assembly light for repeated setup, teardown, and shipping. |
Specifications
| Material | aluminum (other grades on request) |
| Thickness | 0.3-3 mm |
| Size | 80x40mm, 100x60mm, 120x80mm, 150x100mm (custom to your drawing) |
| Marking | chemical etching |
| Surface finish | anodized (5-25 micron; hard 25-70 micron), brushed (Ra 0.4-1.2 micron), matte, mirror, plated, painted |
| Mounting | 3M/VHB adhesive (0.5-1.1mm), mounting holes, rivets, screws |
| Tolerance | +/-0.05-0.10 mm |
| MOQ | 100-500 pcs (by complexity) |
| Lead time | sample 5-7 days; bulk 12-30 days (by quantity) |
Size & price reference
| Example spec | Ref US$/pc |
|---|---|
| aluminum, 25 x 28 mm, 0.2 mm, simple finish | US$0.17-0.23 |
| aluminum, medium size, standard finish | US$0.22-0.29 |
| aluminum, large or specialty finish | US$0.27-0.39 |
Indicative only. Final price depends on surface finish, mounting method, marking complexity, and order quantity. Send your drawing for a factory-direct quote.
What to send
Send artwork or a sample for review, along with your anodize color choice if applicable. Himgo confirms engraving depth and finish before bulk production.
