Black Metal Transfer Stickers
Raised logo stickers finished in matte or glossy black so the mark blends into dark housings instead of catching light. Formed in thin electroformed nickel.
Description
A black metal mark reads differently than a black-painted plastic badge. Buyers choose this route for the raised look of a transfer sticker. They need the mark to disappear against a dark housing instead of catching light. Himgo forms the shape in thin metal, then applies a matte or glossy black finish. The adhesive backing goes on last.
Sizes & thickness
Overall stock stays thin, in the 0.1-0.3mm range, so the finished sticker sits close to the surface. Common footprints are 20x8mm, 30x10mm, and 50x15mm; round marks run near 25mm.
Metals and finishes
Nickel electroforming is the usual base, giving detail down to about 0.05mm before coating. Matte black and glossy black are both available on the same base metal. A brushed or chrome option can come from the same tooling.
Where buyers use it
- Dark-housing consumer electronics where a bright logo would look out of place.
- Automotive interior trim finished in black or dark grey.
- Appliance fronts with a matte black or graphite exterior.
- Packaging that uses a black-on-black brand treatment.
Typical applications
| Industry / setting | How this product is used |
|---|---|
| Automotive blackout trim packages | Applied over matte-black grilles, mirror caps, and badges on blackout trim option packages. |
| Consumer electronics | Used on black-bezel monitors, routers, and speakers so the logo reads without contrasting against the housing color. |
| Black stainless appliances | Applied to black stainless refrigerator and range panels where a bright metal logo would stand out against the darker finish. |
| Packaging for dark-finish products | Matte-black logo applied to black gift boxes for a low-contrast, blacked-out branding look. |
Specifications
| Material | electroformed nickel (other grades on request) |
| Thickness | 0.1-0.3 mm |
| Size | 20x8mm, 30x10mm, 50x15mm, 25mm round (custom to your drawing) |
| Marking | electroforming |
| Surface finish | chrome, brushed, black, gold-tone, plated |
| Mounting | adhesive transfer film (3M/VHB backing) |
| Tolerance | +/-0.05-0.10 mm |
| MOQ | 100-500 pcs (by complexity) |
| Lead time | sample 5-7 days; bulk 12-30 days (by quantity) |
Size & price reference
| Example spec | Ref US$/pc |
|---|---|
| electroformed nickel, 30 x 10 mm, 0.2 mm, simple finish | US$0.12-0.22 |
| electroformed nickel, medium size, standard finish | US$0.20-0.32 |
| electroformed nickel, large or specialty finish | US$0.29-0.46 |
Indicative only. Final price depends on surface finish, mounting method, marking complexity, and order quantity. Send your drawing for a factory-direct quote.
Start a quote
Get a quote from the factory once your artwork and target surface are confirmed.
